| Quantity: | |
|---|---|
Product Characteristics
Comply with the explosion-proof standard GB/T 15411-1994
Bearing body and T-type double cabin load form, it’s compact structure and durable
It can load any cabin design, such as visible light, infrared thermal imaging, laser lighting, infrared lighting, etc
The whole shell is made of 304 stainless steel
Brushless motor with high torque, low power consumption, long life, without losing step
The internal mechanical structure is worm gear and mode, and the gear meshing clearance is small
Encoder positioning is adopted to achieve high positioning accuracy and small back error, and is convenient for video capture and remote observation
It can be equipped with edge computing modules and has a passive heat sink designed for medium and high power computing modules
Specification Parameters
Pan Tilt Hardware Part
Max dimensions | H 392.5mm/482mm*L 530*W 240mm |
Load bearing form | T type side load |
Transmission form | Long life worm gear worm drive |
Self-locking load | 25Kg |
Installation method | Upright installation, base fixed at four points |
Supply voltage | 24V±20% |
Camera communication interface | Reserved 100Mbps network camera interface, optionally 1000Mbps network camera interface |
Pan slip ring life | 3 million revolutions |
Power protection | TVS 6000V anti-lightning and anti-surge, in line with GB/T17626.5 level 4 |
Rotation range | Pan 360° continuous rotation, tilt±90° |
Speed range | Pan 0.11°/s~12°/s, tilt 0.13°/s~7°/s |
Power consumption | ≤ 2W (Standby),≤ 20W (Operation) |
Angular resolution | 0.01° |
Repeated positioning accuracy | ≤0.05° |
Body material | 304 stainless steel (316 stainless steel can be customized) |
Protection level | IP68 |
Operating temperature and humidity | -40℃~65℃, < 90% RH |
Self weight | 40Kg |
Pan Tilt Software Part
Control communication interface | 485/422 |
Communication protocol | PELCO-D |
Baud rate | 9600bps |
Speed control mode | Closed -loop speed control mode |
Position control mode | Closed -loop position control mode, power-off position is not lost |
Self-test | No self-test is required. It will work within 5 seconds after power-on |
Basic motion function | Manual control 64 level speed adjustable, proportional variable speed (It needs to be done with the camera) |
Number of preset bits | 199 |
Positioning function | Absolute angle positioning (adjust positioning speed),3D positioning (It needs to be done with the camera, adjust positioning speed) |
Scanning mode | Preset bit by bit scanning (adjust preset bit residence time and scanning speed), pan two-point scanning (adjust scanning residence time and scanning speed) |
Watch position | Watch position on or off (Support to adjust back to position time) |
Special functions | The PTZ and camera can realize coordinate query or real-time return |
Load part
Load type | T-type double cabin, which can be loaded with visible light + thermal imaging |
Inside the cabin dimensions | Diameter 190mm* L 370mm (customizable) |
Extended function
PTZ expansion | Optional edge computing module and gyroscope module |
