| Quantity: | |
|---|---|
Product Characteristics
The all-metal shell is robust and reliable. The protection level is IP66 so it can beused in an all-weather environment
Using DMD drive system, it has ultra-wide speed dynamic range, ultra-high angular acceleration, and the whole machine is responsive
Due to the advanced control algorithm of DMD drive system, Pan Tilt has ultra-low standby and operating power
Load-supporting body, T-type double cabin load form
Pan Tilt has a position locking function that can be quickly restored when it is deviated by external forces
Absolute or relative angle sensors are available for pan and tilt axis
Various functional modules in the housing can be selected, such as automatic wipers, automatic lighting and so on
Optional housing function modules such as edge computing module and GPS module, etc
The wider power supply voltage has the ability to prevent surge, which is suitable for various application
Specification Parameters
Pan Tilt Hardware Part
Max dimensions | H 315mm* L 475mm* W 245mm |
Mode of load bearing | T-type double side load |
Transmission form | Precise spur gear drive |
Load weight | Single cabin 3KG, double cabin 6KG |
Installation method | Upright installation, base fixed at four points |
Power supply voltage | 24V-36V |
Camera communication interface | Reserved 100Mbps network camera interface |
Pan slip ring life | 3 million revolutions |
Power protection | TVS 8000V anti-lightning and anti-surge, in line with GB/T17626.5 level 4 |
Rotation range | Pan 360° continuous rotation, tilt±90° |
Speed range | Pan 0.13°~180° (Extendable), tilt 0.09°~110°(Extendable) |
Max acceleration | Pan 300°/s², tilt 240°/s² |
Angular resolution | 0.01° |
≤ 0.1° | |
Body material | Aluminum alloy |
Protection level | IP66 |
Operating temperature and humidity | -40℃~65℃, < 90% RH |
Self weight | 20Kg |
Pan Tilt Software Part
Control communication interface | 485/422 |
Communication protocol | PELCO-D |
Baud rate | 9600bps |
Speed control mode | Closed -loop speed control mode |
Position control mode | Closed -loop position control mode, power-off position is not lost |
Self-test | No need for self-test. Working within 5 seconds after power-on (Can be set to simulate self-test) |
Basic motion function | Manual control 64 level speed adjustable, proportional variable speed (It needs to be done with the camera) |
Number of preset bits | 199 (Standard) +255 (Extendable) |
Positioning function | Absolute angle positioning (adjust positioning speed),3D positioning (It needs to be done with the camera, adjust positioning speed) |
Scanning mode | Preset bit by bit scanning (adjust preset bit residence time and scanning speed), pan two-point scanning (adjust scanning residence time and scanning speed) |
Watch position | Watch position on or off (Support to adjust back to position time) |
Reset and restart | PTZ can be remote hard restart and soft restart, and the camera can be controlled hard restart |
Special functions | The PTZ and camera can realize coordinate query or real-time return. The pan and tilt can choose absolute or relative sitting calibration. The PTZ has a position holding function, which can be quickly restored after the deviation caused by abnormal external force. It can configure vertical jitter suppression |
Load part
Load type | T type double cabin |
Housing auxiliary function | Automatic control wiper (automatically adjust the speed of the wiper according to the rainfall), automatic auxiliary lighting (with automatic near and far light switching function) and fog removal function |
Extended function
PTZ expansion | Optional edge computing module, gyroscope module, GPS module and 4G communication module |
