| Quantity: | |
|---|---|
Product Characteristics
Overhead load 15Kg (Extensible)
The structure is designed for use in all-weather environments and strong winds. It has a power failure self-locking function
It belongs to the bearing body, high-strength aluminum alloy shell, and can carry various loads in the form of overhead load
DC brushless motor with gearbox transmission, low power consumption and it can be powered by batteries
Built-in temperature control circuit, can work in a wide range of temperatures
High precision digital absolute position encoder, no power-on self-test, no preset bit accumulation deviation
Fast response speed, no lag feeling, flexible and convenient operation
Multiple preset bits, high precision preset bits, multiple track cruise
Automatic inspection function and scanning function, support for the watch function
The protection level is IP66, and the surface is specially treated to meet the requirements of the three-defense environment
Specification Parameters
Pan Tilt Hardware Part
Max dimensions | H 300mm* L 292.3mm* W 172mm |
Load-supporting form | Top load |
Transmission form | Precise spur gear transmission |
Self-locking load | 15Kg (Extendable) |
Installation method | Upright installation, base fixed at four points |
Power supply voltage | 24V±20% (Customizable) |
Camera communication interface | Reserved 100Mbps network camera interface (optional 1000Mbps network camera) |
Pan slip ring life | 3 million revolutions |
Power protection | TVS 6000V anti-lightning and anti-surge, in line with GB/T17626.5 level 4 |
Rotation range | Pan 360° continuous rotation, tilt -70°~+45° |
Speed range | Pan 0.07~38°/s, tilt 0.07~10°/s (Customizable) |
Power consumption | ≤3W (Standby), ≤18W (Operation) |
Angular resolution | Pan 0.03°, tilt ≤0.01 |
Repeated positioning accuracy | ≤0.1° |
Housing supply voltage | 12V/24V (Customizable) |
Body material | Aluminum alloy |
Protection level | IP66 |
Operating temperature and humidity | -40℃~65℃, < 90% RH |
Self weight (Excluding housing) | 8Kg |
Pan Tilt Software Part
Control communication interface | 485/422 |
Communication protocol | PELCO-D |
Baud rate | 9600bps |
Speed control mode | Closed-loop speed control mode |
Position control mode | Closed-loop position control mode, power failure position is not lost |
Self-test | No self-test is required. It will work within 5 seconds after power-on |
Basic motion function | Manual control 64 level speed adjustable, proportional variable speed (It needs to be done with the camera) |
Number of preset bits | 199 |
Positioning function | Absolute angle positioning (adjust positioning speed),3D positioning (It needs to be done with the camera, adjust positioning speed) |
Scanning mode | Preset bit by bit scanning (adjust preset bit residence time and scanning speed), pan two-point scanning (adjust scanning residence time and scanning speed) |
Watch position | Watch position on or off (adjust back to position time) |
Special functions | The PTZ and camera can realize coordinate query or real-time return |
Load part
Load type | Overhead single cabin housing (Optional variety of specifications), overhead double housing (Optional variety of specifications). It can be used with searchlights, laser lights, radar, multispectral detectors and other load types |
Housing auxiliary function | Automatic control wiper (automatically adjust the speed of the wiper according to the rainfall), automatic auxiliary lighting (with automatic near and far light switching function) and fog removal function |
Extended function
PTZ expansion | Optional edge computing module, gyroscope module, GPS module and 4G communication module |
